• Mounting of ABS plastic parts in the car industry
• Self-adhesive mounting of rubber/EPDM profiles
• Mounting of decorative profiles and mouldings in the furniture industry
• Mounting of battery packs, lenses and touch-screens in electronic devices 

• Type of adhesive tackified acrylic
• Total thickness 205 µm
• Backing material PET film
• Colour transparent 

• Elongation at break: 50 %
• Static shear resistance at 23°C: very good
• Chemical resistance: good
• Humidity resistance: very good
• Tack: good
• Tensile strength: 20 N/cm
• Ageing resistance (UV): very good
• Static shear resistance at 40°C: very good
• Temperature resistance long term duration: 100 °C
• Softener resistance: good
• Temperature resistance short term duration: 200 °C 

• Adhesion to Steel (initial): 11.5 N/cm
• Adhesion to PE (initial): 5.8 N/cm
• Adhesion to PC (after 14 days): 14 N/cm
• Adhesion to PS (after 14 days): 12 N/cm
• Adhesion to ABS (initial) 10.3 N/cm
• Adhesion to ABS (after 14 days): 12 N/cm
• Adhesion to PP (after 14 days): 7.9 N/cm
• Adhesion to PET (after 14 days): 9.5 N/cm
• Adhesion to Aluminium (after 14 days): 10.6 N/cm
• Adhesion to PC (initial): 12.6 N/cm
• Adhesion to PVC (initial): 8.7 N/cm
• Adhesion to PE (after 14 days): 6.9 N/cm
• Adhesion to PS (initial): 10.6 N/cm
• Adhesion to PET (initial): 9.2 N/cm
• Adhesion to Aluminium (initial): 9.2 N/cm
• Adhesion to PP (initial): 6.8 N/cm
• Adhesion to Steel (after 14 days): 11.8 N/cm
• Adhesion to PVC (after 14 days): 13 N/cm

DISCLAIMER NOTE
** Advised for attachment of interior carbon products only **

** This tape can easily be cut or shortened in place using snap-off blades. Most of the interior parts (with less complex shapes) can be installed with double sided tape. However for a perfect flush fitment we do recommend structural glue (not sold by us) **

** For (complex) installations we strongly recommend help or advice from a professional bodyshop or garage) **

** Always pre-fit the carbon part to ensure a good fit, before applying tape or glue **